Nissan 200SX S14 / S14a Gear and Handbrake Gaiter Fitting Guide

The 200SX S14 gear gaiter is held by a centre trim piece around the lever, so the gear gaiter alone is a quick job. The handbrake gaiter needs the centre console loosened.

Time needed: 30 minutes (gear) to 1 hour (with handbrake)

What you need

  • Phillips screwdriver
  • Plastic trim tool
  • Cloth and grips for a tight knob
  • Staple gun or contact adhesive for automotive upholstery

Step by step

  1. Remove the gear knob

    Unscrew the knob anticlockwise. If it will not move by hand, wrap it in a cloth and use grips gently so it is not scratched.

  2. Pop out the centre trim

    Lift out the centre trim piece that holds the gear gaiter in place; it pops out of the console.

  3. Transfer the gear gaiter

    Release the old gaiter from the trim and fit the new one the same way, keeping the seams centred.

  4. Handbrake gaiter

    For the handbrake gaiter, loosen the centre console so you can reach the base of the gaiter under the console, then fit the new gaiter over the handbrake lever.

  5. Refit and check

    Refit the console, trim and knob, then check every gear and full handbrake travel.

Tips from our workshop

  • Do the gear and handbrake gaiters together: the console only needs loosening once.
  • See the S14 listings for the materials and stitching colours available.

Shop the parts for this car

General tips for any car: How to replace a gear gaiter and handbrake gaiter.

Not sure which version you need? E-mail a photo of your original part to info@tuning-shop.co.uk or call 01209 822344 and we will check it for you.

Vehicle names are used only to describe compatibility. Fitting is at your own risk; if in doubt, ask a qualified trimmer or mechanic.