ANAEROBIC ADHESIVES AND SEALANTS

Manufacturers

Suppliers

Viewed products

ANAEROBIC ADHESIVE GLUE 6612 TO PROTECT MICRO-SCREWS AGAINST SELF-UNSCREWING IN GLASSES ELECTRONICS 10g NEW TECHNICQLL

A-185

New product

A BRAND NEW

1 x 10g ANAEROBIC ADHESIVE 6612 - ADHESIVE GLUE

TO PROTECT MICRO-SCREWS AGAINST SELF-UNSCREWING IN GLASSES, ELECTRONICS ETC.

Purple colour

More details

8 Items

£8.99

More info

A BRAND NEW

1 x 10g ANAEROBIC ADHESIVE 6612 - ADHESIVE GLUE

TO PROTECT MICRO-SCREWS AGAINST SELF-UNSCREWING IN GLASSES, ELECTRONICS ETC.

Purple colour

It's an anaerobic adhesive protecting micro-screws against self-unscrewing. Resistant to vibration, irreplaceable in optics, (protection micro-screws in hinges and noses of glasses) watch making, electronics, and assembly of all precise mechanisms.

Anaerobic adhesive with low adhesive strength. Designed to protect all threaded connections from unscrewing as a result of oscillation and vibrations. It replaces pins and split washers.

PARAMETERS:

Viscosity: 500 cP (mPas)
Colour: purple
Busting torque: 5 Nm
Initial cross-linking: 15 min.
Temperature resistance: -55°C to 150°C

FEATURES:

  • single-component
  • fast working
  • easy to remove
  • universal

USE:

Anaerobic adhesive 6612 is used to protect bolts and nuts, which will be unscrewed, during service or maintenance works. When dried, it creates sealing, which protects against corrosion. It is characterised by low adhesive force, thanks to which removal of elements can be done with hand tools.
Scope of typical use:

  • protection of service connecting elements in equipment
  • protection of regulation screws
  • protection of micro screws i.e. in glasses, electronics

ADVANTAGES:

  • easy to use
  • not dripping down and hardens very fast
  • parts can be removed and used again
  • replaces split washers and pins, it seals the surface of the bolt and protects against corrosion

Usage:

  1. In order to get best results joined parts shall be clean, dry, free from oil and grease.
  2. Apply adhesive on three, four screw-threads.
  3. Connect the elements and remove excess of the adhesive.
  4. Leave till dry.

TIPS AND RECOMMENDATIONS:

  • Immediate installation is not necessary, because the adhesive works only when the parts are connected and air access is cut off.

STORAGE:

Store in cold, dry and well ventilated places between -5°C and +20°C.

All anaerobic adhesives and sealants are resistant to temperatures in a range of -55°C do 150°C
Glue Colour Viscosity Breaking moment /
Shear strength
Preliminary
hardening
Possibility disassembly
Threadlocker 6620 Universal blue 800 cP (mPas) 17 Nm 15 min. Using hand tools
Anaerobic Adhesives 6612 purple 500 cP (mPas) 5 Nm 15 min. Using hand tools
Threadlocker 6601 green 150 cP(mPas) 25 Nm 15 min. Using pneumatic tools
Retainer 6638 green 2500 cP (mPas) 25 Nm 15 min. Using pneumatic tools
Gasketmaker Gel 5518 red 400.000 cP (mPas) 10 MPa 15 min. Using hand tools
Pipe Sealer PTFE 5572 white 50.000 cP (mPas) 5 Nm 30 min. Using hand tools

This information is based on current knowledge company NALMAT Trzebinia and is given to describe the product. It cannot be interpreted as a guarantee of its properties. The customer is obliged to test suitability of the product to certain applications, ensure a safe workplace and comply all applicable regulations.