12x 70ml RED HIGH TEMPERATURE SILICONE ADHESIVE SEALANT HERMETIC 300'C High Quality NEW TECHNICQLL

A BRAND NEW

12 x 70ml TUBE OF HIGH TEMPERATURE 300ºC SILICONE ADHESIVE SEALANT

RED COLOUR



DESCRIPTION:

This is a high quality, one component, high-temperature silione adhesive so
called „liquid gasket”. After cure creates100% rubber which leaves flexible for
the whole period of its use at temperatures - 60ºC up to up to + 300ºC.
Perfectly bonds to all smooth metal surfaces, alloys and casts as
well as glass, ceramics,plastic, wood, mineral products, marble, stone,concrete
etc. Replaces different kind of gaskets resistant to UV radiation, changing
weather conditions, oils, cooling liquids, petrol, and water. The product cures
under the influence of moisture contained in air. It is impossible to use it in
rooms completely closed.

IDEAL FOR:

Motorization: sealing elements of electic and combustion engines (oil bowls,
head blocks, drive bridges, gear boxes etc). Replaces gaskets made of paper,
cardboard, rubber, teflon.
Building technical devices: sealing joints where high resistance to high
temperature is required, sealing pumps, filters, heating devices (boilers,
stoves; heaters, cookers).

HOW TO USE:

Dry and clean the surfaces designed for bonding from dust, grease and dirt
Remove old loose seal. Stick masking tape on both sides of the surface tobe
bonded to ensure equal edges. Apply small amount of the silicone Remove an
excees of the adhesive usinng an oiled spatula. Remove the masking tape after 8
min. Remove the cured silicone with a knife or razor blade.