50 x BLACK HT HIGH TEMPERATURE SILICONE ADHESIVE SEALANT 20ml "Liquid gasket" HERMETIC 300'C High Quality TECHNICQLL NEW

A BRAND NEW

50 x 20ml TUBE OF HIGH TEMPERATURE 300ºC SILICONE ADHESIVE SEALANT - "Liquid Gasket"

BLACK COLOUR



DESCRIPTION:

This is a high quality, one component, high-temperature silione adhesive so called „liquid gasket”. After cure creates100% rubber which leaves flexible for the whole period of its use at temperatures - 60ºC up to up to + 300ºC. Perfectly bonds to all smooth metal surfaces, alloys and casts as well as glass, ceramics,plastic, wood, mineral products, marble, stone,concrete etc. Replaces different kind of gaskets resistant to UV radiation, changing weather conditions, oils, cooling liquids, petrol, and water. The product cures under the influence of moisture contained in air. It is impossible to use it in rooms completely closed.

IDEAL FOR:

Motorization: sealing elements of electic and combustion engines (oil bowls, head blocks, drive bridges, gear boxes etc). Replaces gaskets made of paper, cardboard, rubber, teflon.

Building technical devices: sealing joints where high resistance to high temperature is required, sealing pumps, filters, heating devices (boilers, stoves; heaters, cookers).

HOW TO USE:

Dry and clean the surfaces designed for bonding from dust, grease and dirt Remove old loose seal. Stick masking tape on both sides of the surface tobe bonded to ensure equal edges. Apply small amount of the silicone Remove an excees of the adhesive usinng an oiled spatula. Remove the masking tape after 8 min. Remove the cured silicone with a knife or razor blade.

Please note: This silicone is also available in Red or Blue colour. We also do it in three sizes of the packaging: 20ml, 70ml tubes and 300ml cartridges. Please check our other listings or contact us.