12X CONTACT ADHESIVE SPRAY 500 ml (R-628)

Universal spray adhesive based on synthetic rubber, synthetic resins and modifying agents in organic solvents. For gluing polyurethane sponge, polyester sponge, satin fabrics, felt, jute, upholstery rubber, carpets and other upholstery materials in various combinations, and for metal, concrete, raw and varnished wood and wood-based materials.

Base: Synthetic rubber

Color: light yellow

Consistency: Highly sprayed liquid - aerosol Viscosity (Brookfield method): 400 ± 100 mPa * s

Open time: up to 3 minutes Thermal resistance: from -30 ° C to + 80 ° C

waterproof

quick drying

transparent

efficient

HOW TO USE: The glued surfaces should be:

• CLEAN - Clean the glued surfaces so that they are free from any dirt and contamination (dust, grease). To improve the bonding strength of the glued elements, rub them lightly with sandpaper, and then thoroughly dedust and rinse with a Technical Degreaser or a Technicqll Cleaning Kit.

• DRY - Dry the cleaned surfaces. Application temperature: 15-27 ° C.

Do not expose the glued materials to high temperatures before reaching initial strength. The joint obtains its full final strength after 48 hours.

APPLICATION:

1. Shake the packaging before use. Apply the glue evenly on both glued surfaces and wait 30 seconds needed to evaporate the solvent. Then assemble the glued elements and press them. After the elements are glued, correction is not possible.

2. Variable position of the stream from horizontal to vertical (by turning the small valve on the front of the dispenser), allows it to be adapted to the glued surfaces, and the can always remains in the right position.