1 x Clear Epoxy Glue 10min For glass porcelain ceramics stone concrete marble metal rubber wood

A BRAND NEW

1 x EPOXY ADHESIVE GLUE FOR METALS, WOOD, GLASS, STONE etc (2 x 20ml)

SPECIAL TECHNICAL EPOXY - HIGH QUALITY PRODUCT

Quick Dry Adhesive - initial cure 10 min.

DESCRIPTION:

Colourless epoxy adhesive with high speed drying time of 10 minutes. Reliable and effective for permanent bonding of: glass, porcelain, ceramics, plastics (except PP, PE, PTFE), stone, concrete, marble, metals and their alloys, rubber, wood. Perfectly bond these material combinations.

PARAMETERS:

Colour: colourless
Viability after mixing: 3 minutes
Initial hardening: 10 min. (in temp. 20°C)
Complete solidification: 24 h
Shear strength: 10.0 MPa
Temperature range: -30°C to 80°C

FEATURES:

-          does not contain solvents

-          fast curing time (10 minutes)

-          colorless

-          high resistance to electrical breakdown

-          resistant to water and temperature (-30 to + 80ºC)

-          resistant to aggressive chemicals (acids, alkalis, solvents, gasoline) and fluids

-          after curing, it can be machined (grinding, drilling, threading)

IDEAL FOR:

-          jewelery (eg. to connect amber with gold or silver)

-          electronics for bonding components

-          household for emergency repairs.

-          car mechanics (eg. sealing fuel tanks and coolers)

ADVANTAGES:

-          safe to use

-          for indoor and outdoor use

-          for industrial use

-          for sealing of electronic components

-          It allows to restore damaged threads and elements

HOW TO USE:

1. Grind the surfaces to be joined with sandpaper or file.
2. Remove any dirt and grease (use a cleaning kit P-102 or Technical degreaser P-959)
3. Squeeze out the right amount of ingredients (A + B / 1: 1)
4. Mix thoroughly the ingredients until a uniform color is achieved (around 1-2 minutes)
5. An adhesive should be applied on one or both parts to be bonded within maximum 3 minutes
6. Press the elements strongly and keep fixed till the adhesive is completely hardened.

TIPS AND RECOMMENDATIONS:

-          Before mixing of the components warm the product to a room temperature,

-          Mix components A and B in a quantity that can be used in 3 minutes (open time)

-          You can shorten the repair time directing a stream of warm air on the repaired parts eg. using a hair dryer

-          Do not use for connecting / filling PP, PE and PTFE

STORAGE:

Store in temperature from 5°C to 25°C. Protect against moisture.